Home About Us Oil Mills Refinery Plants Solvent Extraction Plants Desiccated Plants Contact Us
Solvent Extraction Plants Solvent Extraction Plants  Solvent Extraction Plants
Solvent Extraction Plants   100 to 7,000 TPD
Now with technical collaboration
with Crown Iron Works Company, USA.
  CONDENSER

 
A wet dust catcher at outlet vapour line from desolventiser reduces load
on condensor as well as minimizes any scale formation.
Heat Exchanger/Economizer, in vapour line, reduces load on condenser.
 
 CAPACITY 30 M2 to 200 M2

 

 CONDENSER
  DESOLVENTISER TOASTER
  
Desolventisation Section: Desolventiser toaster is designed for efficient
desolventising of extracted meal.
 

Indirect heating of material with improved contact with hot surface helps in properly desolventising the extracted meal.
Internal vapour traveling arrangement reduce steam consumption.

Mechanical/Pneumatic level controlling system maintains minimum bed height for complete desolventisation within short contact time.

Provision of direct steam helps in maintaining quality of finished product & its moisture content.

Selection of agitator and its drive with proper reduction gear box, FLP motor & fluid coupling reduce load on drive & minimizes shut down periods.
 
 CAPACITY 60 TPD to 500 TPD

 

 DESOLVENTISER TOASTER
EXTRACTOR
  
HIGHLIGHT
 

Flexible speed of belt/extractor material bed height adjustment & rate of circulation makes it possible to use variety of seeds as well as variable range of capacity from 50% to 125% of rated capacity.
Special band conveyor belt permit better percolation.

High-pressure pump ensures better circulation and spray arrangement. Provides uniform solvent / miscella spray throughout the bed width.
Special back wash, rinsing system keeps band conveyor mesh free of checking.
Proper drainage period reduce % of entrap solvent in Extracted meal.
Miscella temperature controllers helps extractability.
 
 CAPACITY 60 TPD to 200 TPD

 

EXTRACTOR
  OIL HEATER







 





 
 		  
Kumar Solvent Extraction Plants are designed for universal oil bearing
raw material.
 
One of the basic requirement of efficient oil extraction is preparation of raw
material, Superior design features of Solvent Extractor, Desolventiser and
distillation section minimizes process loss and cost. Also designing of solvent
Extractor Desolventising unit and distillation unit is carried out to minimize
process loss and process cost.
 
 MODEL KM 10 KM 30 KM 50
 CAPACITY 10 M2 30 M2 50 M2
OIL HEATER
  STRIPPER
  
Distillation Section: It disolventises miscella for solvent free oil as well as
for maximum recovery of solvent.
 
Evaporator capacity designed to minimize load on condenser & better oil recovery.

Specially designed stripper with provision of cooling system, produce oil with 125 °C. flash point, and minimum moisture in the oil. The temperature of oil coming out of dryer/cooler will be 10 deg.c. above ambient temperature.

Specially designed miscella filter help to minimize fine in miscella before distillation which ultimately help to reduce scale formation in condenser.

Efficient heat exchangers results in optimum utilisation of heat reduceing steam consumption.
 
 CAPACITY 60 TPD to 200 TPD

 

 STRIPPER
Preparatory Section (Soyabean)
  FLAKER FLAKER
 
2 Roll Flakers are provided with hydraulic adjustment system to produce well
prepared flakes for efficient extraction. The rolls are made of chilled casting.
 CAPACITY TDP
50
100
125
175
 NO. OF ROLLS
2
2
2
2
 MOTOR H.P.
2 X 25
2 X 40
2 X 50
2 X 60

 
  CRACKER
 
2 & 4 Rolls grooved crackers are provided with gap adjustment for uniform cracking of
the oil seeds with minimum fines. These rolls are also of chilled casting.
 
 CAPACITY TDP 10-20 100 150 200 300
 NO. OF ROLLS 2 4 4 4 4
CRACKER
 
 Office: 101, Kakad Bhavan, 30th Road, Opp. Gaiety Galaxy Cinema,
            Bandra (west), Mumbai-400050, India.
  Tel: +91-22-2644 1673 / 2644 1674 / 2644 1667 / 2642 7982 Fax: 91-22-2642 8136
  Factory: Plot No. 7, Mira Co-op. Industrial Estate, Mira Road, Dist. Thane-401164, India.
  Website: www.kumarmetal.com    E-mail: kumarind@vsnl.com